These arrows by Skylon are very usefull for archers with a longer drawlength, due to there 33inch shaftlength. Where most carbon shafts or arrows stop at 32inch, this Frontier arrow goes an inch longer which might be the difference you need. Ofcourse we can also cut these arrows to the desired length making this an arrow for all archers. These arrows are also lightweight, making it a fast arrow and with a inner diameter of .244 (6,2mm) lots of components from different brands fit the Frontier.
Standard we cut these arrows at the length of your choice and apply the inserts and points. If you don't want this, select the option 'Inserts and points seperately'. Very usefull when you want to use Protector Hats on your arrows.
The color of the feathers can differ per order.
Specifications Skylon Frontier Carbon Arrows:
Full Length: 33 inch
used points: 5/16 (300, 350 & 400 spine) - 9/32 (500-800 spine)
Material: 24-TON Carbon
ID: 6.2mm / .244" (S size)
Straightness: .005″
4 inch Fathers
SPINE OUTSIDE DIAMETER GPI STOCK LENGTH
350 7.39mm 8.50 33"
400 7.35mm 7.33 33"
500 7.12mm 5.80 33"
600 7.05mm 5.58 33"
700 7.00mm 5.12 33"
800 6.85mm 4.20 33"
100% carbon arrow by Skylon. The Skylon Savage is a ready to shoot arrow, complete with nock, point and Bohning Blazer vanes.
Specifications Skylon Savage Carbon Arrow:
100% carbon
Lengte: 30 inch
Straightness .006 inch
Available spines: 350, 400 en 500
S nock
Bohning Blazer vanes
S-size insert
These insert from Skylon are ment for Screw-in points after installing the inserts in the shaft. to be used with shafts or arrows with an inner diameter (ID) of 6.2mm. Such as these Skylon arrows.Skylon Carbon EdgeSkylon Carbon SavageSkylon Carbon FrontierSkylon Carbon BentwoodSkylon Carbon RoveSkylon Carbon 3K MaverickSkylon Carbon Phoric
Complete carbon arrows with 3 inch natural feathers. A perfect arrow for the starting, traditional archer. These arrows have an inner diameter of 4.2mm meaning the g-size arrow components from several brands will fit these arrows.Pin nock en and point are pre-installedPrice of the arrows is per pieceColor of the feather may vary from the image and may very per order.Specifications Skylon Carbon Novice Arrows:Material: 24-Ton CarbonInner diameter: 4.2 mm / 0.166 inchStraightness: 0.007 inch
SPINE OUTSIDE DIAMETER GPI STOCK LENGTH POINT WEIGHT (GRAIN)
800 5.48mm 5.80 30" 90
900 5.36mm 5.34 29" 70
1000 5.32mm 4.90 29" 70
1100 5.22mm 4.64 28" 70
1300 5.18mm 4.16 28" 70
These innerfit nocks by Skylon are meant for use with 6.2 mm inner diameter arrows. These would for instance be the following shafts by Skylon:Skylon Carbon EdgeSkylon Carbon FrontierSkylon Carbon SavageSkylon Carbon BentwoodThese nocks also fit in shafts from different manufacterers like Bearpaw, Gold Tip and Easton. As long as the innderdiameter of the shaft is 6.2 (mm) or .245 (inches).
These innerfit nocks by Skylon are suited for all shafts with an inner diameter (ID) of 4.2mm, the so called G-size. There are for example the Skylon Carbon Brixxon or Carbon Radius, the Bearpaw Penthalon Slim Line series or all Easton shafts/arrows that use a G-size nock.
Skylon screw tips for the various carbon arrows from Skylon. The diameter of the screw thread is universal, so that these points can be screwed into any insert, pay attention to the outside diameter of the relevant arrow.
These innerfit nocks by Skylon are meant for use with 6.2 mm inner diameter arrows. These would for instance be the following shafts by Skylon:Skylon Carbon EdgeSkylon Carbon FrontierSkylon Carbon SavageSkylon Carbon BentwoodThese nocks also fit in shafts from different manufacterers like Bearpaw, Gold Tip and Easton. As long as the innderdiameter of the shaft is 6.2 (mm) or .245 (inches).
These inserts are made for use with 6.2 inner diameter shafts. These are for example the following Skylon shafts:Skylon Carbon Edge Skylon Carbon Rove Skylon Carbon 3K Maveric Skylon Carbon Bentwood Skylon Carbon Phoric
These points are suited for use in 4.2 mm inner diameter shafts like the Skylon Brixxon and Radius. Because of their bulge shape, these points punch a slightly bigger hole in the target, prolonging the life of your carbon shafts. Available weights:
Spine 400-450: 80-100 grain & 100-120 grain
Spine 500: 80-100 grain & 100-120 grain
Spine 550-600: 80-100 & 100-120 grain
Spine 650-750: 80-100 grain
Spine 800-900: 60-80 grain & 80-100 grain
Spine 1000-1100: 60-80 grain
These Skylon arrows may look like arrows, but they are in fact carbon ones. The relatively low weight of these shafts facilitates a high arrow speed and the .244" inner diameter is quite common, making it easy to find parts. These arrows come standard at 33 inches, making them suitable for longer draw lengths as well. We'll gladly shorten them for you as well.
Standard we cut these arrows at the length of your choice and apply the inserts and points. If you don’t want this, select the option ‘Inserts and points seperately’. Very usefull when you want to use Protector Hats on your arrows.
The color of the feathers can differ per order.
Specifications Skylon Bentwood:
Full length: 33 inch
Point size: 5/16 (300, 350 &400 spine) 9/32 (500-800 spine)(not included)
Material: 24-TON Carbon
ID: 6.2mm / .244" (S size)
Straightness: .005"
4 inch feathers
SPINE GPI OUTSIDE DIAMETER MAX LENGTH
300 9.68 7.70mm 33"
350 7.89 7.43mm 33"
400 7.73 7.40mm 33"
500 7.25 7.36mm 33"
600 5.87 7.17mm 33"
700 5.70 7.10mm 33"
800 5.40 7.00mm 33"
These points from Skylon are suitable for the ID6.2 mm arrows from Skylon, for example, but also fit on other shafts with the same diameter. These so-called S-size points have a weight of 100 grain and must be glued into the shaft. Suitable for all Skylon ID6.2 shafts from spine 300 to spine 800.
These points from Skylon are suitable for the ID5.2 mm arrows from Skylon, for example, but also fit on other shafts with the same diameter. These so-called X-size points are degradable (80, 90 or 100 grain) and must be glued into the shaft. Suitable for all Skylon ID5.2 shafts from spine 300 to spine 500.
Speed, power and light weight, this typifies the Maximal Edge carbon arrow. Ideal for 3D use. The used components are all in line with market conditions. A great choice for a friendly price.We deliver this arrow complete, with point and at your desired length. If you want to shorten your arrow yourself, select the full length option. You will then receive the insert and the point separate from the arrow.
Specifications Skylon Carbon Edge Arrow:
Material: carbon
Straigtness: +/- .005″
Vanes: Blazer vanes
Nock: Large groove nock
Insert: S-Size
SPINE GPI OUTSIDE DIAMETER MAX LENGTH
300 8.50 7.55mm 33"
350 7.61 7.39mm 33"
400 7.33 7.35mm 33"
500 5.80 7.12mm 33"
600 5.58 7.05mm 33"
700 5.12 7.00mm 33"
800 4.20 6.85mm 33"
These Skylon points are suited for use in shafts with a 3.2mm inner diameter. These are for instance: The Performa, Paragon, Precium and Preminens.
These points are glue-in points, meaning you have to glue them into the shafts with either hot melt or a suitable glue like the tip grip by GoldTip. Please mind, with some glues it is very difficult to remove the points.
You can break bits off the points of 10 grains per piece.
Available weights:
Spine 350: 100-120 grain
Spine 400-450: 100-120 grain
Spine 500-600: 100-120 grain
Spine 650-800: 80-100 grain
Spine 850-1100: 60-80 grain & 80-100 grain
These Skylon shafts may look like wooden shafts, but they are in fact carbon shafts. The relatively low weight of these shafts facilitates a high arrow speed and the .244" inner diameter is quite common, making it easy to find parts. Inserts and nocks are included, so you only have to add feathers and points to make them complete. These shafts come standard at 33 inches, making them suitable for longer draw lengths as well. We'll gladly shorten them for you as well.
Specifications Skylon Bentwood:
Full length: 33 inch
Point size: 5/16 (300, 350 &400 spine) 9/32 (500-800 spine)(not included)
Material: 24-TON Carbon
ID: 6.2mm / .244" (S size)
Straightness: .005"
Insert an nock included
SPINE
OUTSIDE DIAMETER
GRAIN PER INCH
LENGTH
0.800"
7.00mm
5.40
33"
0.700"
7.10mm
5.70
33"
0.600"
7.17mm
5.87
33"
0.500"
7.36mm
7.25
33"
0.400"
7.40mm
7.73
33"
0.350"
7.43mm
7.89
33"
0.300"
7.70mm
9.68
33"
This 'g-size' shaft by Skylon (4.2 mm inner diameter) is ideal for the archer looking for more than just ready made arrows. These arrows come 32 inches shaft length in every spine, meaning even people with long draw lengths and low draw weight can assemble a great shooting arrow. The fact that they are this long also means that you can cut them to size, or let us cut them to size, so you can use them with a clicker for a specific draw length. The included pin is intended to protect the shaft when you are shooting small groups and busting nocks. Specifications Skylon Carbon Radius Shaft:
Spines: 2000, 1800, 1500, 1300, 1100, 900, 850, 800, 750, 700, 650, 600, 550, 500, 450, 400
Inner diameter: 4.2mm
Material: 24-ton carbon
Pin insert included
SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN)
400 32" 9.47 6.13mm 80-90-100 or 100-110-120
450 32" 8.63 5.99mm 80-90-100 or 100-110-120
500 32" 8.00 5.88mm 80-90-100 or 100-110-120
550 32" 7.47 5.77mm 80-90-100 or 100-110-120
600 32" 7.09 5.71mm 80-90-100 or 100-110-120
650 32" 6.42 5.60mm 80-90-100
700 32" 6.17 5.58mm 80-90-100
750 32" 5.94 5.50mm 80-90-100
800 32" 5.80 5.48mm 60-70-80 or 80-90-100
850 32" 5.48 5.42mm 60-70-80 or 80-90-100
900 32" 5.34 5.36mm 60-70-80
1000 32" 4.90 5.32mm 60-70-80
1100 32" 4.64 5.22mm 60-70-80
1300 32" 4.16 5.18mm 60-70-80
1500 32" 4.00 5.05mm 60-70-80
1800 32" 3.89 5.00mm 50
2000 32" 3.60 4.96mm 50
These innerfit nocks by Skylon are suited for all shafts with an inner diameter (ID) of 4.2mm, the so called G-size. There are for example the Skylon Carbon Brixxon or Carbon Radius or all Easton 4mm shafts/arrows.
The Frontier carbon shafts from Skylon are strong and lightweight. With a length of 33 inches, they are also suitable for archers with a long draw length. The inner diameter of 6.2mm is a standard size, which means that components for these shafts are widely available.
Features Skylon Carbon Frontier Arrow:
Full length: 33 inch
Required points: 5/16 (300, 350 & 400 spine), 9/32 (500–800 spine)
Material: 24-TON Carbon
ID: 6.2mm / .244″ (S size)
Straightness tolerance: .006″
SPINE GPI MAX LENGTH OUTSIDE DIAMETER
400 7.33 33" 7.35mm
500 5.80 33" 7.12mm
600 5.58 33" 7.05mm
700 5.12 33" 7.05mm
800 4.20 33" 6.85mm
Wrap
Enhance your arrow with a wrap, available in various prints. A wrap also provides an ideal surface for glue and feathers to adhere to. In addition, arrows with a bright wrap are often easier to find after shooting.
Feathers
We offer a selection of feathers in different sizes and brands. In terms of quality, there is hardly any difference between Bearpaw and Gateway feathers, so it mostly comes down to preference. Both brands may vary slightly in color tones and availability per size or length. The larger the feather, the better the arrow stabilizes — but it also creates more drag, slightly reducing arrow speed.
Feather sizes: 3 inch, 4 inch or 5 inch
-Bearpaw: Solid, Barred or Zebra (not all versions and colors are available in all sizes)
-Gateway: Solid, Barred or Camo
Nock
Choose from various brands, each with its own nock fit. The Bearpaw Speednock is the narrowest of the options and will likely fit best on thinner strings.
Point
We offer a range of different point types.
Brands: Saunders – Tophat or Bearpaw
All brands offer different point weights, which affect arrow flight. A heavier point makes the arrow slightly weaker (more flexible), while a lighter point makes it stiffer. Bearpaw and Tophat points are equipped with a small rubber O-ring between the point and the insert, helping them stay securely in place and preventing them from loosening due to vibration.
Protector Hat
Give your arrow extra protection with a Protector Hat — a metal sleeve that can be used on both the front and back of the arrow. The sleeve slides over the shaft and is held in place by the insert or nock. When you hit something hard or shoot into another arrow, the Protector Hat adds strength and greatly increases the chance that your arrow will survive the impact.
Please note: This product is handmade, so delivery time may be slightly longer than usual. Custom-made products cannot be exchanged.
This carbon 'g-size' shaft by Skylon with an innerdiameter of 4.2mm are perfect archers looking for an affortable shaft but who value precision and straightness! These shafts can be ordered in any spine up to 32 inches, so that you will not run into the limit of the arrow even with lighter draw weights and longer draw lengths. We can cut these shafts to size for you, giving you the perfect length to shoot with a clicker. The arrows come with a pin insert, on which you can place a pin nock. The pin will ensure that you have less chance of damaging the arrow with a small group.Specifications Skylon Carbon Brixxon Shaft:
Spines: 1100, 1000, 900, 850, 800, 750, 700, 650, 600, 550, 500, 450, 400
Innerdiameter: 4.2mm
Material: 24-ton carbon
Pin insert included
Straightness: ±0.0015"
SPINE LENGTH GPI OUTSIDE DIAMETER RECOMMENDED POINT (GRAIN)
400 32" 9.47 6.13mm 60-70-80
450 32" 8.63 5.99mm 60-70-80
500 32" 8.00 5.88mm 60-70-80
550 32" 7.47 5.77mm 60-70-80 or 80-90-100
600 32" 7.09 5.71mm 60-70-80 or 80-90-100
650 32" 6.42 5.60mm 80-90-100
700 32" 6.17 5.58mm 80-90-100
750 32" 5.94 5.50mm 80-90-100
800 32" 5.80 5.48mm 80-90-100 or 100-110-120
850 32" 5.48 5.42mm 80-90-100 or 100-110-120
900 32" 5.34 5.36mm 80-90-100 or 100-110-120
1000 32" 4.90 5.32mm 80-90-100 or 100-110-120
1100 32" 4.64 5.22mm 80-90-100 or 100-110-120
Deze pijlen van Skylon zien er van buiten uit als houten pijlen maar zijn in feite van carbon. Het relatief lichte gewicht faciliteert een hoge pijl snelheid en de .244″ binnendiameter is vrij gangbaar, wat het vinden van onderdelen vereenvoudigt. De pijlen zijn standaard 33 inch, wat ook voor de langere treklengtes in de meeste gevallen afdoende is, maar we korten de pijlen eventueel voor je in. Verderop in de producttekst kun je meer informatie vinden over het samenstellen van je pijl.Eigenschappen Skylon Carbon Bentwood Pijl: Volle lengte: 33 inch Benodigde punten: 5/16 (300, 350 &400 spine) 9/32 (500-800 spine) Materiaal: 24-TON Carbon ID: 6.2mm / .244″ (S size) Rechtheid tolerantie: .005″
SPINE GPI MAX LENGTH OUTSIDE DIAMETER
300 9.68 33" 7.70mm
350 7.89 33" 7.43mm
400 7.73 33" 7.40mm
500 7.25 33" 7.36mm
600 5.87 33" 7.17mm
700 5.70 33" 7.10mm
800 5.40 33" 7.00mm
Wrap
Verfraai je pijl met een wrap, in verschillende prints beschikbaar. Ook zorgt een wrap voor ideale hechting van lijm en veren aan de schacht. Daarnaast kun je een pijl met een opvallende wrap vaak beter terugvinden.
Veren
Wij bieden de keuze tussen verschillende maten en merken veren. Kwalitatief is er nauwelijks verschil tussen de Bearpaw en gateway veren en is dat dus om het even. Beide merken hanteren soms net even iets andere kleur tinten en beschikbaarheid per kleur en/of lengte. Hoe groter de veer op de pijl, hoe beter de pijl zal stabiliseren. Echter is het oppervlak dan ook groter en heeft je pijl net iets meer weerstand. De pijl snelheid zal bij een grotere veer dus iets afnemen.
Maat Veren: 3 inch, 4 inch of 5 inch
-Bearpaw: Egaal, Barred of Zebra (niet alle uitvoeringen en kleuren zijn in alle maten beschikbaar)
-Gateway: Egaal, Barred of Camo
NockKeuze uit diverse merken met allemaal hun eigen nockfit. De Bearpaw Speednok is de smalste uit de lijst, met een dunnere pees zal deze waarschijnlijk het best passen.
Punt
We bieden de mogelijkheid om uit verschillende soorten punten te kiezen.
Merken: Saunders – Tophat of BearpawAlle merken hanteren een diversiteit aan puntgewichten, welke weer van invloed is op de pijl vlucht. Door een zwaardere punt wordt de pijl iets slapper, met een lichte punt iets stijver. De punten van Bearpaw en Tophat zijn voorzien van een rubber ringetje welke tussen de punt en insert zit. Hiermee draai je de punt iets beter vast en trilt deze minder snel los.
Protector Hat
Bescherm je pijl extra goed met een Protector Hat, dit is een metalen beschermhuls die zowel aan de voor- als achterkant gebruikt kan worden. De beschermhuls wordt over de schacht geschoven en op zijn plek gehouden door de insert of nock. Wanneer je iets hards raakt, of op je eigen pijl schiet, biedt de Protector Hat iets meer stevigheid en is de kans aanzienlijk groter dat je pijl de klap overleefd.
Let op, wij vervaardigen dit product handmatig, daardoor kan de levertijd iets langer zijn dan dat je van ons gewend bent. Daarnaast is het niet mogelijk om custom producten te ruilen.
Entry level carbon shafts for Traditional archers. With a length of 33inch perfect for shooters with a long draw length. Inserts and nocks (Skylon S-size) are included but not installed.
Specifications Skylon Carbon Frontier Shafts:
Material: Full catbonFull length: 33inch
Straightness: +/- .006"
Nock: Large groove nock (S-size)
Insert: .244 (S-size)
SPINE LENGTH GPI OUTSIDE DIAMETER
400 33" 7.33 7.35mm
500 33" 5.80 7.12mm
600 33" 5.58 7.05mm
700 33" 5.12 7.00mm
800 33" 4.20 6.85mm
