Recurve Limbs

The Honoric limbs by Kinetic are beautiful ILF limbs that are very good for the starting to advanced archer who is ready for a bit of extra speed and torsional stiffness. The combination of carbon and foam is an often used combination because of their lack of weight and consistent nature. Very good materials for limbs! Specifications Kinetic Honoric Limbs: Material: Carbon/Foam Fitting: ILF Type of string: Fast FlightExplanation length recurve limbs: The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths: Short: 66 inch bow Medium: 68 inch bow Long: 70 inch bow Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.

A nice pair of limbs for the beginning archer, made of laminated fiberglass and wood. These limbs are suited for use with an ILF riser. Specifications Core Prelude Limbs: Material: Fiber/wood Fitting: ILF Type of string: Fast Flight Special order: 66/12 - 66/14 - 68/14 Explanation length recurve limbs: The length designation of Olympic recurve limbs are generally based on a 25 inch riser. Most limbs however come in 3 sizes: Short, Medium and Long, which gives the following bow lengths: Short: 66 inch bow Medium: 68 inch bow Long: 70 inch bow Of course it is possible to use the limbs on shorter or longer risers. However, take into account that in addition to the length of your bow, this also has an effect on the draw length. As a rule of thumb: for every inch the riser is shorter than 25 inches, you must add 1 LBS to the draw weight. Also, for every inch the riser is longer than 25 inches, you must subtract 1 LBS from the draw weight. Please note, this information is purely and only intended as a rule of thumb; due to the variety in materials, combinations you can make and difference in shapes, the final results can still deviate.

Features Sanlida Miracle X7 Fiber Wood ILF Recurve Limbs:Material: Fiber Wood Fitting: ILF Tips: ReinforcedLength on a 25 inch riser: Short: 66 inch - Medium: 68 inch - Long: 70 inch Draw weight on 25": 14 to 46 LBS (in 2 LBS increments)

These luxurious limbs by Kinetic are built up out of carbon and bamboo, for a fast and smooth limb. The narrow design helps the arrow speed, as well as the redesigned lighter and stronger limb tip. This does not only bode well for shootability, it also means you can shoot fast flight equivalent string materials.Specifications Kinetic Finity: Material: Bamboo, Cross carbon Fast Flight Compatible Fitting: ILF Draw weight: 20-44 LBS in 2 LBS increments

These nice looking Winners (WNS) Delta F2 limbs use the ILF system. This means you can use them with nearly all modern recurve risers. Because of the combination of wood and foam in the core, these limbs are relatively smooth and quite fast considering their price point. Since the limbs have reinforces tips you have the possibility to shoot a fast flight (or similar) material string.   Specifications Winners (WNS) Delta F2 Recurve Limbs: Material: Foam/Wood Fitting: ILF String: Fast Flight Length: Short 66″ – Medium 68″ – Long 70″ Drawweight: 16 to 40 LBS (in steps of 2 LBS) Explanation Length Recurve Limbs The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths: Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bow

The Armato C3 slats are the entry-level to mid-range limbs from Winners (WNS). Available in two versions. The Foam and the Wood core. This is the Foam core.Compared to the Wood core version, the Foam core version is more weather resistant. This means there will be less variation in shooting in different weather conditions such as temperature or humidity.Specifications Winners(WNS SF-Line)Armato C3 Carbon Foam: Material: Foam/carbon Fitting: ILF Draw weight: 18 – 42 LBS (Depends on length, in steps of 2lbs) Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch) Guidelines Riser and Limbs combination The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example: Medium (68 inch) limbs with a draw weight of 30 LBS with a: 1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS 2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS 3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.

The Trinity C6 limbs from Winners SF-Line are flexible and comfortable to shoot due to the use of nano-carbon and high-foam core technology. Matt finished with blue accents.This limb has a greater recurve curvature than most limbs.Specifications Winners(WNS SF-Line) Trinity C6 ILF LimbsMaterial: Carbon/FoamFitting: ILFString: Fast FlightPoundage: 22 to 46 pounds in 2-pound increments Length: Short, Medium, Long (66, 68, and 70 inches on a 25 inch handle)

Please note, due to the complex nature of this product, a certain configuration may have a longer delivery time. Therefore, please contact us for current delivery times before placing an order. This is to avoid disappointment. The 10% online discount does not apply to this product. The Uukha SX50 is the brand's entry-level model. The SX 50 is made of 50% carbon and 50% fiberglass pressed together in a mold for a monolithic construction. This ensures better durability than laminated limbs.All Uukha limbs are equipped with the S-Curve. Uukha slats are more curved than standard slats. This has a few advantages, namely flexibility, speed and stability. As a shooter you will notice this most in the low increase in poundage when fully drawn. Features Uukha Sx50 Ilf Recurve LimbsMaterial: 50% Carbon, 50% Fiberglass. MonolithicFitting: ILFString: Fast FlightLengths: Short 66", Medium 68", Long 70", Extra Long 72" (On a 25" handle)Draw weights: 20# to 40# in 2# increments

The Fury is a stable, lightweight and fast limb from the Kinetic brand. This limb has a wide base that extends to a thin tip. This shifts the mass of the limb away from the part that moves the most, resulting in rapid arrow flight. Specifications Kinetic Fury ILF Recurve Limbs: Material: 3K Carbon/Foam Fitting: ILFString: Fast Flight Lengths: Short 66″ – Medium 68″ – Long 70″ Draw weights: 24 to 44 LBS (in 2 LBS increments) Guidelines Riser and Limbs combination The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example: Medium (68 inch) limbs with a draw weight of 30 LBS with a: 1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS 2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS 3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.

Features Shocq Grant Screw-on Limbs: Material: FRP/Wood Fitting: Screw-on Length: 54/58/66/68/70 Inch Draw Weight: 12 to 30 LBS (in increments of 2 LBS) Draw weight is based on a 28 Inch draw length

Features Core Prestige ILF Recurve Limbs:Fitting: ILFMaterial: Fiberglass with wooden coreReinforced tipsDraw weight: 14 to 40lbs (in 2lb increments)Available in short, medium and longLength on a 25 inch riser: Short: 66 inches - Medium: 68 inches - Long: 70 inches

Budget-friendly cross carbon limbs from Core. With front and rear cross carbon for high torsional stiffness. With a maple core. From 38 pounds this core is doubled.Specifications (LIMBS) ILF Limbs: Material: Maple and Cross-Carbon Fitting: ILFString: Fast Flight Draw weight: 20 - 42 lbs Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch) Guidelines Riser and Limbs combination The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example: Medium (68 inch) limbs with a draw weight of 30 LBS with a: 1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS 2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS 3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.

Ready for a new set of limbs for your Core Take Down bow? These limbs are white with black/blue print and fit the risers by Core Archery. The limbs are suited for the risers by Core Archery like:– Core Wooden Take Down recurve bow (also used in the Wooden Bow Sets)– Core Pro Metal– Core Jet Metal– Core Silouette Specs Core Shift wooden limbs Length: 62 – 70 inch (depends on riser length) Drawweight: 16 – 38 lbs (Note: 40 lbs only available in 62, 64 and 70 inch. If you want to order this size, please say so in the comments at the end of your order)

Lots of quality for a good price. With these limbs, Kinetic made a nice product for the beginning and intermediate archer. The limbs are made up from wood and fibre glass. The limbs are based on usage of a 25 inch riser. They will fit in other sizes too but then the length of the bow changes with it. Specifications Kinetic Limbs Engage: Material: Fiber/wood Fitting: ILF String type: Fast Flight  

WNS Motive F5 limbs are high performance limbs for the beginning and intermediate archer looking for an affordable fiber/foam limb. The limbs are made of a combination of high quality foam and fiberglass. They are build for a fast and stable performance. These limbs are designed in way that should make them torque resistant. Specifications WNS Motive F5 Limbs: Material: Wood/Fiber Fitting: ILF Lenght: Short (66 inch) – Medium (68 inch) – Long (70 inch) Drawweight: 16 – 46 LBS (with increments of 2 lbs) Guidelines Riser and Limbs combination The draw weight of Olympic recurve limbs is always measured on a 25 inch riser. It is generally possible to use limbs on a smaller riser, but consider that there will be a change of draw weight, a general rule of thumb is that for every inch difference the draw weight will change 1 LBS, for example: Medium (68 inch) limbs with a draw weight of 30 LBS with a: 1) 25 inch riser makes a 68 inch bow with a draw weight of 30 LBS 2) 23 inch riser makes a 66 inch bow with a draw weight of 32 LBS 3) 21 inch riser makes a 64 inch bow with a draw weight of 34 LBS Also consider that draw weight of ILF limbs are generally measured at a draw lenght of 28 inch, as a rule of thumb you need to add 2 LBS of draw weight for every inch you draw more then 28 inch and vice versa. All this instructions are to be considered as GUIDELINES as the different form and construction of a limb and/or riser can give higher ore lesser results, nonetheless it is a good base to start from.

the Kinetic Vaultage limbs are built up using layers of Nano-carbon and foam, ensuring extreme amounts of stability, less vibration and a smoother draw curve. The design of these limbs will result in better energy storage and therefore higher arrow speeds. The limb tips are quite narrow and keep the mass weight down. These limbs are reinforced at the points of contact with the riser. Specifications Kinetic Vaultage Carbon Foam: Materials: Foam and 3K Nano-Carbon Fitting: ILF String: Fast Flight or similar Lengths: Short 66″ – Medium 68″ – Long 70″ Draw weights: 20 to 44 lbs (in 2 lbs increments) Explanation Length Recurve Limbs The length of recurve limbs are typically based on the use of a 25 inch riser. Most limbs come in three sizes: Short, Medium and Long. This will get you the following lengths: Short: 66 inch bowMedium: 68 inch bowLong: 70 inch bow Of course you can also use these limbs on different lengths of risers, however, you will have to take into account that besides changing the total length of the bow, you will also change the draw weight. As a rule of thumb, you can add roughly 1 pound per decreasing inch and subtract roughly 1 pound per inch you add to your set-up. Please be mindful of the fact that this is purely meant as a rule of thumb and not the absolute truth. There may be differences due to the vast selection of materials, shapes and combinations.