Nice vinyl decal, can be used on your car, motorcycle, caravan, suitcase etc. Great gift for any archer or for yourself ofcourse!
Features
Material: Vinyl
Color: Black or silver
Type: Male or female
Dimensions: about 10 x 10 cm
Nice vinyl decal, can be used on your car, motorcycle, caravan, suitcase etc. Great gift for any archer or for yourself ofcourse!
Features
Material: Vinyl
Color: Black or silver
Type: Male or female
Dimensions: about 10 x 10 cm
Nice vinyl decal, can be used on your car, motorcycle, caravan, suitcase etc. Great gift for any archer or for yourself ofcourse!
Features
Material: Vinyl
Color: Black or silver
Type: Male or female
Dimensions: about 10 x 10 cm
Weights are attached to the bare bow in order to achieve a certain stabilization when firing. The weight ensures that the bow does not tilt towards the archer after releasing the shot, but rather remains in a stable, upright position. With bare bows, unlike the Olympic recurve bows, the center of gravity is behind the pressure point of the hand, so that these bows tend to tilt backwards without the use of additional weights.
Specifications Arctec Barebow Weight:
Colors: Black or Silver
Weights: 300, 400, 500 or 650 grams
Material: Stainless Steel
Tread: 5/16
Nice vinyl decal, can be used on your car, motorcycle, caravan, suitcase etc. Great gift for any archer or for yourself ofcourse!
Features
Material: Vinyl
Color: Black or silver
Type: Male or female
Dimensions: about 10 x 5 cm
A screw to secure weights to your stabilization. Can be tightened with an Allen key. Also fits stabilization from other brands.Specifications Arctec Stabilization Screw
Material: stainless steel
Thread: 1/4UNC(small) and 5/16UNF(large)
Length small: 1/2", 1" and 2"
Length Large: 1", 1 1/4" and 2"
The Arctec Crosstube Weights can be used in combination with the Arctec Crusstube Stabilizers (short and long).
Features Arctec Crosstube Weights
15 grams: Aluminum weight
40 grams: Steel weight
45 grams: Steel end cap
Features Arctec Crosstube stabilizers:
Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
Very low susceptibility to wind by only 16mm diameter – independent of wind direction
Easy fine-tuning made possible through stainless steel or aluminium weights
The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
Packaging doubles as a protective cover (transparent tube)
Handmade in Germany (Solingen)
Damper not included!
Features Arctec Crosstube stabilizers:
Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
Very low susceptibility to wind by only 16mm diameter – independent of wind direction
Easy fine-tuning made possible through stainless steel or aluminium weights
The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
Packaging doubles as a protective cover (transparent tube)
Handmade in Germany (Solingen)
Features Arctec Crosstube stabilizers:
Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
Very low susceptibility to wind by only 16mm diameter – independent of wind direction
Easy fine-tuning made possible through stainless steel or aluminium weights
The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
Packaging doubles as a protective cover (transparent tube)
Handmade in Germany (Solingen)
The Arctec Damper set can be used on the Arctec Crosstube stabalizers (short and long). Handmade in Solingen, Germany
Specifications:
– Material: aluminum, rubber
